How to Install The Automatic Snacks Frying Machine

Here is a brief introduction to the installation of the snacks frying machine.
1. During the installation of the snacks frying machine, we should first connect the automatic temperature control meter box, blower, hoist motor, clean slag pump, total power supply, check the frying basket to rise, and the decrease should be normal.

2. We should close the connection pipe of the dregs oil pump and the fryer, and then start to fill the pan with the iron slag, rust, garbage and other sundries in the frying machine, and release it by artificial slag.

3. Then we want to install the oil pump and Fried pipeline connection pipe, check the slag removal pump and deep fryer all pipes and joints don't leak, the slag removal filter package in slag removal filter barrels, oil and then put into the container.Use a dregs oil pump to pump oil into a frying pan (oil is 15 centimeters high) and soak the electric parts of the meter box in the cooking oil.

4. Start heating.

5. We need to check the meter box of electrothermal accidentally metal part is soaked in oil, the temperature control display is normal, the temperature indicates the temperature dial to the number in the you need the pot (130-190 ℃).(two temperature control table data equivalent).

6. Temperature display arrived at 130-190 ℃ began a small amount of blanking Fried, need a small amount of blanking for the first time, two times more.
If you want to know more about the automatic snacks frying machine,feel free to contact me.
Email:ellie@machinehall.com